Contact Us
880-2-8931641, +8801313797075

Reverse Osmosis (RO)

Purifying water through pressure-driven separation.

Proven, reliable, high-performance water purification

Compared to traditional filtration technologies that rely on a screen or filter to remove particles, reverse osmosis (RO) is a pressure-driven separation process that employs a semipermeable membrane and the principles of crossflow filtration.

Reverse osmosis water treatment provides the finest level of filtration. The RO membrane acts as a barrier to all salts and inorganic molecules, as well as organic molecules with a molecular weight greater than approximately 100. It is therefore a highly effective process for removing contaminants such as:

We provide the most widely used RO technology in the world — trusted globally by municipalities , industries , manufacturers, commercial markets, and families wanting clean, healthy water at home.

Reverse Osmosis (RO) details

A closer look

See more details about reverse osmosis water treatment.

Overcoming osmotic pressure

In ordinary osmosis, when a semipermeable membrane separates solutions of differing solute concentrations, the lower-concentration solution flows into the higher-concentration solution in attempt to reach equilibrium: an equal degree of solute concentration on both sides of the membrane. As the amount of solution on the higher-concentration side increases, pressure on that water column rises until it is high enough to hinder the flow of the lower-concentration solution across the membrane. This is the action of osmotic pressure.

In reverse osmosis (RO), pressure that exceeds a system’s osmotic pressure is applied to that system. The pressure forces the higher-concentration solution back across the semipermeable membrane, leaving solutes that are blocked by the semipermeable membrane behind.

Typically, reverse osmosis water treatment results in a rejection of dissolved salts that is 95 – 99 percent or greater, depending on membrane type, feed composition, temperature, and system design

Reverse osmosis water treatment can provide finer filtration than either nanofiltration or ultrafiltration. Using RO as a pretreatment process for ion exchange (IX) can substantially reduce the operating costs and regeneration frequency of the IX system.

Typical applications include:

Reverse osmosis water treatment is also often used to produce ultrapure water for the semiconductor industry , in boiler water treatment for the power industry, and for applications in the health care and bioprocessing industry.

Maintaining flow and desired results

Precipitate salts and other impurities that a pressurized flow of feedwater forces against a semipermeable RO membrane can clog or “foul” that membrane. This, in turn, can decrease the performance of a reverse osmosis water treatment system overall.

To significantly reduce the rate of membrane fouling, RO elements use crossflow filtration. This process forces lower-concentration water through the RO membrane, while the separated flow of higher-concentration water moves across the surface of the membrane, carrying away the rejected salts and impurities.

In essence, crossflow filtration happens like this: A high-pressure pump continuously pumps feedwater into the element of the reverse osmosis water treatment system. The pressure forces some water to cross the semipermeable RO membrane, resulting in a low-saline or purified product called permeate on one side, and a high-saline or concentrated brine, called concentrate or reject, on the other. A concentrate valve controls the percentage of feedwater that goes to the concentrate stream and the permeate. In the system, the low-saline or purified permeate — the feedwater that has passed through the membrane — remains isolated from the concentrate flow. The concentrate stream removes the concentrate that cannot permeate the membrane and sweeps them out of the system.

Reverse osmosis systems can thus:

Depending on the need and application, either the permeate or the concentrate may be the desired product.

Reverse osmosis water treatment can also be used to selectively separate certain ions and molecules, although to a lesser degree than can ion exchange systems.

Influencing factors

RO membrane performance (improvement or degradation) is affected by a number of different factors, including aspects of the feedwater, such as:

Normalization calculation tools can help distinguish between the normal, predictable performance changes caused by factors such as those listed above, and deteriorating performance caused by membrane fouling or similar issues.

Other factors influencing RO membrane performance include:

Find more details in our tech fact sheet: FILMTEC™ Membranes: Factors Affecting RO Membrane Performance

Our approach to reverse osmosis water treatment

A critical component of the FilmTec™ family of products, DuPont Water Solutions reverse osmosis water treatment technology supports high-quality, top-performing water purification in consumer, commercial, municipal, and industrial water treatment systems across the globe.

Our FilmTec™ RO elements house spiral-wound, thin-film composite polyamide membranes. Typically, a spiral-wound configuration means lower replacement costs, simpler plumbing systems, easier maintenance, and greater design freedom than other configurations, such as tubular, plate-and-frame, and hollow-fiber module designs. Our RO elements are manufactured using the most highly advanced, automated manufacturing technology in the industry, which results in maximum uniformity and minimized element-to-element differences. Our rigorous, extensive quality testing ensures that FilmTec™ elements meet our high fabrication standard.

Compared to cellulose membranes, our FilmTec™ elements for reverse osmosis water treatment can:

Our high-performance FilmTec™ RO elements for commercial markets — such as for car washes, hotels and resorts, and hospitals and other institutions — as well as municipal and industrial markets, can:

Find reverse osmosis products

View a list of our industry-leading reverse osmosis products.

See what’s possible

Ask how we can help your industry or market with our leading FilmTec™ portfolio of

reverse osmosis membrane elements

Contact Us

our Partners

Latest News

united trade center

Attend For Sustaibable Water Management Expo-2023

read more
united trade center

Fire Exhibition

read more
united trade center

DTG Exhibition

read more

Avenue trade & Engineering ltd ©copyright 2023. all rights reserved.